Get The Fine Gold You Have Been Missing! (See Video At Bottom Of Page!)
Manufactured by MotherLode Prospecting Supplies, this product has recently experienced some slight modification in the length of the catch pockets, slight widening of the tray area and a return to the matting on the drip lip.
This is our BIGGEST SELLER (kits included), year after year, and it goes out the door almost as fast as we can build them, especially in Northern Alberta, famous for it's flour gold, and it's MADE IN CANADA!
How expensive do you think it is throwing out gold you can't see in your pan?
Give us a call, bring a small sample and take it for a test drive - let's see what you've been throwing away! If there is gold there, you will find out pretty fast, and you will be totally amazed at how efficient this baby is. If it works for that really fine stuff you get in the N. Saskatchewan or Red Deer River, imagine what it will do for your cleanup process!
The Black Scorpion is a Fine Gold Recovery table fashioned after the old “Miller Style Tables”, but with a twist.
Professionally moulded from sturdy ABS, this system is designed, by the use of polarity and texture, to separate even the smallest of gold specs from your screened concentrates, with a very simple process encompassing a slow water flow and brushing technique.
Gold Bowls and Gold Wheels are pretty good at getting small gold, but they are slow, require a lot of fine tuning and require many re-runs.
Vibrating tables are also very efficient, but also very expensive, and they too require several re-runs to maximize your recovery.
The Black Scorpion works best based on mesh size, and when you properly adjust your water flow to the mesh size of the concentrate, it’s recovery is amazing and with very little gold reaching the tailings box.
In fact, you will be able to recover gold you probably thought you didn’t even have because it was too small to see in your gold pan, and it is this gold that is the most abundant, yet gets thrown out because it’s almost invisible.
For years the Miller Table was quite successful at recovering the finest of gold out of your concentrates, and then came the "Brooming Table", so with that in mind, and a lot of fine-tuning, we have developed what we feel is the best "Fine Gold Recovery" table out there for the price, incorporating water flow and the use of brushes.
Introducing the "Series II C - Black Scorpion" Fine Gold Recovery Table!
We wanted to develop something that was faster and more efficient than a vortex bowl, gold wheel or even panning but priced affordably for the small miner with limited resources.
- Vibrating Tables Can Cost Thousands.
- Vortex Bowls are SLOW and need constant adjustment of water flow.
- Gold Wheels won't easily clean micron Gold and can cost hundreds of dollars more!
- Give us a call, and come over and give it a try.
|Made from tough ABS, we have embedded our own 2 stage's of texture, that will quickly attract even the tiniest gold specs. Also features 2 built-in "Catch Pockets" where you can hold your gold until you're ready to recover it.|
At the bottom end we have 3
some low profile matting to grab any bits of gold that may get missed & migrate down towards the tailings box.
To increase the flow of water over the matting, we have also fluted and angled the lower portion of the table slightly, in order to prevent "Loading", which helps to trap and retain those spec's that may piggy back on a piece of sand (retain this trapped material for screening down further or to re-run later).
The people to whom we have demo'd this unit, even at 12 mesh (recommended for -20m), are simply amazed at how fast and efficient it is, exposing and holding those tiniest specs of gold you can barely see without a magnifying glass!
It's even upgradeable to convert to a 2 n 1 system, by adding our new Concentrating Insert, you can now convert your table into a real concentrator to enrich and decrease the volume of your material before you run it through the table thereby minimizing your time even more. It's an absolutely amazing - one-of-a-kind system.
- Dimensions - Overall - 30" x 11.5"
- 3-stage Texture for superior gold trapping
- Removable Water Diffuser (for cleaning).
- Sturdy 12+" Steel rear legs with "Adjusters" to fine-tune your table's level and pitch.
- Swivel Hose Connector
- Hose adaptor with flow control to regulate water flow
- 3/4" Poly Hose Bib & adaptor.
- Plastic end covers for the leg tops
- 2" Brush for "Brooming".
- Small "Artists Style" brush for separating out the fine gold & guiding it to the "Catch Pockets".
- Plated Steel "Foot Pads" for stability
If you need a pump, tub, stand and hose, check out our packages!
Recommended Accessories (or See our Package Deals):
- Tub Stand with "Pump Mount" & Tailings Box
- 500 - 750 GPH 12v Pump
- "Tough Tub" for recirculation (see products)
- 3/4" Flex Hose or Poly Tubing
- 12v Clamps (Battery style)
- Gold Drop Water Surfactant
- 2-Tier Mini-Concentrator or concentrator insert for enriching your material.
- Concentrating Insert w/vortex matting as found in the Cube
We are currently working on a couple of additional "Upgradeable" options to make this system a state of the art processing plant.
Please note, as with any fine gold recovery system it is highly recommended you dry your concentrates and remove the heavy black sands ( drying makes removal much easier with less gold trapping ), then screen to a consistent size before running. This will significantly reduce processing time and result in less gold making it to the tailings.
ORDER TODAY right from us, OR one of our dealers ( as follows)….Canada
All prices are in Canadian Funds, which is the true price, and do not include shipping and/or tax (if applicable)
VIDEO OF TABLE IN ACTION ( This is where the table is overloaded and run at full speed after magnetically separating the blacks out and screening to consistent size.)
This product was added to our catalog on Saturday 29 March, 2014.