Bilge Pump Tub Mount / Hanger

What better way to mount your bilge pump in a tub and away from the silt, grit and other abrasives that find their way to the bottom of the tub, and sucked up again by your pump.

We all know this drastically shortens the life of your pump, but in the interim also reduces it's efficiency as it continues to wear.

We have created our own pump mount specifically to hang on the (inside) of the tub, well away from all that grit drastically extending the life of your pump, and works on tubs that have a lip of 1" or less, and a reach of 7 3/4" over-all ( great for larger tubs ).

This mount was designed for the 64L black tubs with the yellow snap on lids you find at Home Depot ( and other places ), that will be incorporated on our new "Soon To Be Released" 3-Tier Concentrating System.

All holes are pre-drilled for the SPX / Johnston / Seacrest pumps, that have interchangeable cartridges that range from 500 - 1250 gph.

Other pumps must be mounted by user ( no returns on user modified units ).

SPECIFICATIONS: (excludes pump).....

• Overall Length - 8 1/8" (207mm approx.)
• Overall Width - 4" ( 102mm approx.)
• 2 - 3/8" Terminal Holes - 3/8" D ( 9.5mm approx )
• 3 - holes for mounting Johnson Style / Seacrest pumps ( takes 6-32 x 3/4 or 1").
• Included - 2 Terminal Bolts, 2 Locknuts, 2 Washers, 2 Coupling Nuts ( Terminal Clamping Posts), 3 x 6-32 x 3/4" bolts, 3 6-32 washers, 2 - Connectors, Assembly Instructions.

GALLERY